4.6 LITER FORD INTAKE MANIFOLD INSTALLATION INSTRUCTIONS
Download Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is...
View Article2002 – 2007 Honda CB900F (919 or Hornet 900)
PREPARATION 1. Assemble the brackets to the outside of the fairing mounting area using the M6 x 16 Screws, 5/16” Flat Washers and Nuts supplied with this kit. Figure 1a. Be sure that the round hole...
View ArticleFord Triton cylinder heads Spark plug thread repair
Download Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads, Model years 1991 through 2005 The only inserts approved by Ford Motor Company for the 5.4 and 6.8L 2 valve...
View ArticleHonda VTX 1300 BA-2061-00 BAK (Big Air Kit) Installation Manual
Download INCLUDED IN THE KIT: (1) Billet BAK Cover (1) M6 x 60 Socket Cap Screw (1) M5 x 10 Socket Cap Screw SS (1) M6 Fender Washer (5) M6x12mm Phillips Head Stainless Screws (1) 1/4″ x 1 1/2″ Plastic...
View ArticleHonda VTX 1300 BA-2061-XX – BAK (Big Air Kit) Installation Instructions
Download CAUTION! We strongly recommend that a qualified Honda Technician install this kit since the carburetor must be removed from the motorcycle. Please read all directions before starting. INCLUDED...
View ArticleHonda VTX1300 BA-2061-XX-BAK (Big Air Kit) Installation Guides
Download INCLUDED IN THE KIT: (1) Re-usable Performance Air Filter (1) Baron VTX 1300 BAK Backing Plate (1) Filter Raincoat (1) Baron VTX 1300 Jet Kit (1) Reed Valve Block-off Kit (2) ¼-28 x 1 13/ 16 ”...
View ArticleEdelbrock Pro-Flo EFI Fuel Rail for Honda Acura “B”and “D”Series INSTALLATION...
Download • DESCRIPTION: The Edelbrock Honda/Acura Fuel rails, Part # 4794,4796, and 4798, have been designed to fit stock, Edelbrock Victor X, or our Edelbrock Performer X manifolds using stock Honda...
View Article1948-1952 FORD F-1 PICKUP CROSSMEMBER KIT INSTALLATION INSTRUCTIONS
Download 1. Start by supporting the truck on 4 jack stands. The truck should be sitting on approximately the same angle as it does on the ground, or slightly lower in front. 2. Remove all the old front...
View ArticleHonda VTX 1800 Big Air Kit (BAK) Installation Instructions
Download INCLUDED IN THE KIT: (1) BAK Cover (1) Re-usable Performance Air Filter (1) Filter Raincoat (1) Mounting Post (4) M5x40 Stainless Cap Screws (2) M5x10 Stainless Cap Screws (1) Baron VTX 1800...
View Article2009 Honda CR-V 17″ ALUMINUM WHEEL INSTALLATION INSTRUCTIONS
Download PARTS LIST Aluminum wheel (The illustration may differ from the actual wheel.) Wheel center cap (The illustration may differ from the actual center cap.) Center cap emblem 2 Push nuts Wheel...
View Article
